8290-195 Woodward overspeed protector
The 8290-195 is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:
I. Product Overview
- Brand and Model: Woodward 8290-195
- Series: 505 Series Digital Governor
- Type: Microprocessor-based controller
- Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.

II. Core Functions
- Speed Control:
- 8290-195 Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
- Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
- Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
- System Protection:
-
- Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
- Offers local/remote control priority selection to adapt to different operational scenarios.

-
How to wire servo drives
There are two connections that can be connected.
One is the power line, which provides three-phase AC power to the motor through the driver, usually with three or four wires;
The second is the encoder signal line, where the position signal is fed back to the driver for calculation by the encoder.
Generally speaking:
Nowadays, AC servos are commonly used in servo systems, so their power cords are not much different from ordinary three-phase asynchronous motors.
Connect the power cord from the servo drive power module to the motor power port
The encoder is connected from the servo encoder port to the motor encoder port. Depending on the encoder signal, some may require the installation of intermediate conversion devices.
III. Technical Specifications
- Power Supply: 18-32 VDC, supporting 24VDC input.
- Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
- Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
- Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
- Communication Interfaces: 8290-195 Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
- Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
- Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
- Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
- 8290-195 Weight: Approximately 9.11 pounds (4.13 kilograms).
IV. Application Scenarios
- Steam Turbine Control: 8290-195Suitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
- Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
- On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.
V. Product Advantages
- High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
- Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
- Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
- Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.
Woodward ship parts module debugger controller actuator generator set
5461-062 Woodward Ship Spare Parts,
9905-089 Woodward turbine controller,
5463-178 WOODWARD Debugger unit,
5437-524 Woodward Ship Spare Parts,
5462-581 Woodward speed control module,
5441-889 Woodward overspeed protector,
5464-444 Woodward overspeed protector,
8440-2082 Woodward turbine controller,
5450-106 Woodward Ship Spare Parts,
8915-877 WOODWARD Debugger unit,
ASML Mat: 4022.455.16632 Laser Module, working
SVG ASML 879-0794-001 Micrascan, Axiom Assembly
ASML 4022.651.46881
Asml 4022.436.82805 multiplexer 402243682805
ASML 4022.631.1584 Optical Gas Analyzer,Fedex
Pacific Scientific SC750 Servo Drive 121-236 Rev B. SC755A040-08 ASML SVG USA
ASML SVG90S Catch Cup Assembly
14066 ASML MODULE BOARD SVG MOTION CONTROLLER, PCB 4022.471.6982
CYMER 05-05186 ASML 854-2343-002 SHARED MEMORY 256K PC (VL 7709B)
ASML 4022.635.17672 SEM-I-494=8F21
HP AGILENT 5517D-C19 260UW 3.73MHZ LASER HEAD ASML
ASML QIOPTIQ PHOTONICS 4022.651.50093 YS ILLUMINATION LPPS IPG YLM-150-WC-QQ
ASML 4022.472.42584 RED635 Solid State Laser Module 635nm ELEC-I-1050=9A
ASML 4022.455.76444 1000W to 2500W TCU Upgrade Kit
New ASML 4022.634.44761 NXT Dynamic Flex +x pca Still Sealed
ASML 4022.636.77924
RASM0208 ASSY-PROCESS MANIFOLD 150MM -FRONT ASM E2 & E2000 REACTOR ASML
Philips 172100 Processor PCB Card ASML 9406.217.2100 PAS 50002500 Working
ASML 4022.430.2048 Mains Switch Unit 4022.428.1761.
ASML 4022.471.5695 PCB CONTROL CARD,
ASML 859-9967-001 RETICLE FOCUS GRATING 0.35u





Reviews
There are no reviews yet.