8440-2164 Woodward speed control module

Price:

Product basic information
Manufacturer: Woodward
Model: 8440-2164
Belonging to the famous 505 series
Supports multiple communication protocols and can be smoothly integrated with the existing control system of the factory
Core application: Designed specifically for speed control and protection of steam turbines
8440-2164 controller has stable performance and high reliability

Categories: WOODWARD
Tags: - Actuator 8440-2164 controller debugger module Motor touch screen WOODWARD

8440-2164 Woodward speed control module

The 8440-2164 is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:

I. Product Overview

Brand and Model: Woodward 8440-2164
Series: 505 Series Digital Governor
Type: Microprocessor-based controller
Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.

II. Core Functions

Speed Control:
- 8440-2164 Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
System Protection:
- - Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
  - Offers local/remote control priority selection to adapt to different operational scenarios.

The implementation methods of sine wave controllers include analog control and digital control. Analog controllers generally use analog circuits such as operational amplifiers to achieve motor control,

which has the advantages of fast response and good real-time performance. However, the accuracy is limited by the devices and the control accuracy is relatively low. Digital controllers control motors

through processors such as digital signal processors (DSPs), which have the advantages of high precision and strong programmability. However, they require high-performance processors and

complex control algorithms, resulting in high costs.

Sine wave controllers are widely used, especially in DC and AC frequency converters, to supply AC motors. By controlling the AC voltage and frequency, sine wave controllers can achieve precise

adjustment of motor speed and torque, and are widely used in industrial automation, robot control, electric vehicles, and other fields.

Vector controller and sine wave controller are commonly used control methods in motor controllers, and their main differences are as follows:

1. Different working principles: Vector controllers are based on vector control theory to achieve motor control, while sine wave controllers control motors by directly controlling three-phase sine waves.

2. Different control accuracies: Vector controllers have higher control accuracy due to their ability to control motor torque and speed with high precision, making them suitable for high-precision control fields.

However, sine wave controllers have lower control accuracy than vector controllers and are suitable for some low precision controls.

3. Different adaptability to load: Vector controllers can detect and adjust load conditions in real time, which can better adapt to changes in load. Sine wave controllers have lower adaptability to changes

in load and require pre planning of control strategies.

4. The difficulty level of controller implementation varies: Vector controllers have complex processing techniques and generally require high-precision control algorithms and processors, making them relatively

difficult. The sine wave controller technology is relatively simple, and the controller implementation is relatively easy.

In short, vector controllers and sine wave controllers each have suitable application scenarios, and it is important to choose a motor control method that is suitable for your own application needs.

III. Technical Specifications

Power Supply: 18-32 VDC, supporting 24VDC input.
Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
Communication Interfaces: 8440-2164 Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
8440-2164 Weight: Approximately 9.11 pounds (4.13 kilograms).

IV. Application Scenarios

Steam Turbine Control: 8440-2164Suitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.

V. Product Advantages

High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.