8575-241 Woodward overspeed protector

Price:

Product basic information
Manufacturer: Woodward
Model: 8575-241
Belonging to the famous 505 series
Supports multiple communication protocols and can be smoothly integrated with the existing control system of the factory
Core application: Designed specifically for speed control and protection of steam turbines
8575-241 controller has stable performance and high reliability

Categories: WOODWARD
Tags: - Actuator 8575-241 controller debugger module Motor touch screen WOODWARD

8575-241 Woodward overspeed protector

The 8575-241 is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:

I. Product Overview

Brand and Model: Woodward 8575-241
Series: 505 Series Digital Governor
Type: Microprocessor-based controller
Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.

II. Core Functions

Speed Control:
- 8575-241 Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
System Protection:
- - Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
  - Offers local/remote control priority selection to adapt to different operational scenarios.

Issues and factors affecting the controller

1、 Controller failure. From the perspective of expression, there may be the following situations:

1. Damage to power devices. 2. Damage to the internal power supply of the controller. 3. The controller operates intermittently.

4. Control signal loss caused by worn connecting wires, poor contact of connectors, or detachment of connectors.

2、 Regarding the analysis of the causes of the above failure modes:

A. There are several possible causes of damage to power devices: motor damage, poor quality or insufficient selection level of

power devices themselves, loose device installation or vibration, motor overload, damage to power device drive circuits or unreasonable parameter design.

B. There are several possible causes of damage to the internal power supply of the controller: short circuit in the internal circuit of the

controller, short circuit in the peripheral control components, and short circuit in the external leads.

C. There are several possible reasons for the intermittent operation of the controller: parameter drift of the device itself in high or low

temperature environments, high overall power consumption in the controller design, causing local high temperatures in some devices and

putting the device itself into a protective state, resulting in poor contact.

D. There are generally several possible causes of wire wear and poor contact or detachment of contact plugs: unreasonable wire selection

, incomplete protection of wires, poor selection of connectors, and weak crimping between wire harnesses and connectors.

III. Technical Specifications

Power Supply: 18-32 VDC, supporting 24VDC input.
Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
Communication Interfaces: 8575-241 Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
8575-241 Weight: Approximately 9.11 pounds (4.13 kilograms).

IV. Application Scenarios

Steam Turbine Control: 8575-241Suitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.

V. Product Advantages

High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.