9907-1105 Woodward speed control module

Price:

Product basic information
Manufacturer: Woodward
Model: 9907-1105
Belonging to the famous 505 series
Supports multiple communication protocols and can be smoothly integrated with the existing control system of the factory
Core application: Designed specifically for speed control and protection of steam turbines
9907-1105 controller has stable performance and high reliability

Categories: WOODWARD
Tags: - Actuator 9907-1105 controller debugger module Motor touch screen WOODWARD

9907-1105 Woodward speed control module

The 9907-1105 is a microprocessor-based digital governor controller produced by Woodward, belonging to its classic 505 series.
It is primarily designed for speed control and protection of steam turbines. Below is a detailed introduction to this product:

I. Product Overview

Brand and Model: Woodward 9907-1105
Series: 505 Series Digital Governor
Type: Microprocessor-based controller
Purpose: Specifically designed for steam turbines to control their speed and provide overspeed protection.

II. Core Functions

Speed Control:
- 9907-1105 Precisely controls the speed of steam turbines by adjusting steam inlet flow.
- Supports single-range or split-range actuators to accommodate turbines of different sizes.
Overspeed Protection:
- Incorporates triple independent overspeed protection logic to ensure rapid shutdown in case of overspeed, preventing equipment damage.
- Provides an overspeed test button for convenient on-site testing of protection functions.
Emergency Shutdown:
- Equipped with an emergency stop button for immediate shutdown in emergency situations.
System Protection:
- - Automatically switches control modes upon sensor failure to ensure uninterrupted system operation.
  - Offers local/remote control priority selection to adapt to different operational scenarios.

2、 Function and performance

1. Function

1) The fire linkage controller can receive fire alarm signals from the fire alarm controller and emit fire alarm sound and light signals. In a non delayed state,

it can send a start signal to various controlled devices connected to it within 3 seconds, directly or indirectly control the controlled device according to the set control logic,

and at the same time send a start light indication signal. The fire linkage controller can receive feedback signals from controlled equipment actions and display the corresponding equipment status.

2) The fire linkage controller can receive alarm signals from related triggering devices such as the pump start button, water flow indicator, and gas fire extinguishing system start button,

display their location, emit alarm sound and light signals, and send the alarm signals to the connected fire alarm controller.

3) The fire linkage controller can complete all control functions and indicate status manually or automatically. In automatic mode, manual insertion operation takes priority.

4) The fire linkage controller has a direct manual control unit. The direct manual control unit shall have at least six independent manual control switches, each corresponding to a

direct control output. When the direct manual control unit can be used independently, various working states such as startup and feedback of the controlled equipment can be

displayed separately next to the manual control switch. When the direct manual control unit cannot be used independently, the other working states of the controlled equipment,

except for the startup state, are indicated separately next to the manual control switch or displayed on the shared display of the linkage controller.

5) The fire linkage controller can initiate logical relationships through manual or programmed input, and has corresponding input “OR” logic and/or “AND” logic programming functions for control outputs.

III. Technical Specifications

Power Supply: 18-32 VDC, supporting 24VDC input.
Display: Two-line x 24-character LED display for clear indication of operating status and parameters.
Enclosure: NEMA 4X or IEC 60529 IP56 rated for protection against harsh industrial environments.
Inputs/Outputs:
- Inputs: 6 programmable current inputs, 16 discrete contact inputs.
- Outputs: 2 actuator outputs, 8 relay outputs, 6 programmable current outputs.
Communication Interfaces: 9907-1105 Supports RS-232, RS-422, and RS-485 hardware interfaces for easy integration with host computers or other devices.
Software: Equipped with OpView™ and 505View software for parameter configuration, monitoring, and fault diagnosis.
Operating Temperature: -20 to +60°C (some models support -4 to +140°F).
Storage Temperature: -40 to +85°C (some models support -40 to +185°F).
9907-1105 Weight: Approximately 9.11 pounds (4.13 kilograms).

IV. Application Scenarios

Steam Turbine Control: 9907-1105Suitable for steam turbines of various sizes, including industrial steam turbines, small grid turbo-generators, and turboexpanders.
Single Extraction and Admission Applications: Designed for operating steam turbines in single extraction and/or admission applications.
On-Site Programming: Allows on-site operators to program and adjust parameters through an integrated operator control panel, adapting to different operating conditions.

V. Product Advantages

High Reliability:
- Microprocessor-based design ensures precise control and stability.
- Triple independent overspeed protection logic provides multiple layers of safety.
Flexibility:
- Supports various actuator and sensor configurations to accommodate different turbine models.
- Offers a rich set of input/output interfaces for easy system expansion and integration.
Ease of Use:
- Two-line x 24-character LED display provides an intuitive operating interface.
- A 30-key multifunctional keyboard simplifies parameter configuration and operation.
Compatibility:
- Supports multiple communication protocols for easy integration with DCS, PLC, and other systems.
- Provides OpView™ and 505View software for remote monitoring and fault diagnosis.